NOTE: This website is a static copy that has been archived on KK4NDE's website June 12, 2021 with the permission of G4HFQ to preserve the content before his site is shut down.
Modifying configuration settings
Contents
- Index
- Previous
- Next
Modifying configuration settings
Whenever a memory image has been loaded into the program, either from disk or directly from the FT-60, there is an extra tab shown called Menu Items.
Clicking on this tab will show you the values currently assigned to the configuration menus for this particular memory image.
The program enables you to make changes by choosing values from drop-down boxes or typing in values instead of pressing button sequences and turning the dial knob on the radio.
When the memory image is initially loaded the Menu Items tab becomes available. No tab is shown if nothing is loaded.
Make changes as required using the drop-down boxes.
If you want to return to default start-up values click the 'Change all settings to the default values' button.
When you are satisfied with your changes, click the 'OK - Apply all changes made' button. The next time you load the image back into the radio they will take effect.
NOTE: This website is a static copy that has been archived on KK4NDE's website June 12, 2021 with the permission of G4HFQ to preserve the content before his site is shut down.