NOTE: This website is a static copy that has been archived on KK4NDE's website June 12, 2021 with the permission of G4HFQ to preserve the content before his site is shut down.
Modifying APRS/GPS settings
Contents
- Index
Modifying APRS/GPS settings
Whenever a memory image has been loaded into the program, either from disk or directly from the radio, there is an extra tab shown called APRS/GPS.
Clicking on this tab will show you the values currently assigned to the APRS/GPS menus for this particular memory image.
The program enables you to make changes by choosing values from drop-down boxes or typing in values instead of pressing button sequences and turning the dial knob on the radio.
When the memory image is initially loaded the APRS/GPS tab becomes available. No tab is shown if nothing is loaded.
Make changes as required using the drop-down boxes.
If you want to return to default start-up values click the 'Change all settings to the default values' button.
When you are satisfied with your changes, click the 'OK - Apply all changes made' button. The next time you load the image back into the radio they will take effect.
NOTE: This website is a static copy that has been archived on KK4NDE's website June 12, 2021 with the permission of G4HFQ to preserve the content before his site is shut down.